CleanPacs Disinfectant Meets EPA's Criteria for Coronaviruses

Impressive

AQUA CHEMPACS DISINFECTANT CLEANER KILLS 99.9% OF GERMS

ACP Disinfectant Kills SARS-Related Coronavirus 2, the virus that causes COVID-19.

Buy Refills Now

ATTENTION:

Aqua ChemPacs Disinfectant Cleaner, or any of our products, is not to be consumed or injected under any circumstances. Always read the label for proper use instructions and handling.

How to Use ChemPacs

How to Use Clean Pacs - Step 1 Add Packet - Origins of Clean

Step 1

Insert entire ChemPac into bottle. Do Not Cut Or Tear Open ChemPac.

How to Use Clean Pacs - Step 2 Add Water - Origins of Clean

Step 2

Fill bottle with cool or warm water.

How to Use Clean Pacs - Step 3 Shake and Spray - Origins of Clean

Step 3

Wait approximately 1 minute and gently shake. Your cleaning solution is ready to use.

DIRECTIONS FOR USE

Buy Refills Now

General Cleaning & Deodorization

Apply product to soiled area with hand pump trigger sprayer. Product must be diluted as indicated in the DISINFECTION section. Thoroughly wet soiled surface and scrub as necessary. Rinse surface with potable water and wipe dry with the provided microfiber cloth.

Disinfection

To disinfect inanimate, hard, non-porous surfaces use the appropriate size premeasured packet.

Packet Size

Net Weight

Number of Packets

Dilution

PPM

Small

0.1023 Ounces

1

Quart

1552

Stir gently to form a uniform solution. Apply solution with hand pump trigger sprayer so as to wet all surfaces thoroughly. Allow to remain wet for 10 minutes, then remove excess liquid. For heavily soiled areas, a pre-cleaning step is required. Prepare a fresh solution for each use.

Cleaner, Disinfectant, Detergent, Deodorizer, *Virucide, Fungicide, Mildewstat Kills Pandemic 2009 H1N1 Influenza A virus (formerly called swine flu)

This product is a phosphate-free formulation designed to provide effective cleaning, deodorizing, and disinfection for hospitals, nursing homes, hotels, schools, and restaurants where housekeeping is of prime importance in controlling cross-contamination from treated surfaces. This product, when used as directed, is formulated to disinfect hard non-porous inanimate environmental surfaces such as floors, walls, metal surfaces, stainless steel surfaces, glazed porcelain, glazed ceramic tile, plastic surfaces, bathrooms, shower stalls, bathtubs, and cabinets. For larger areas such as operating rooms and patient care facilities, this product is designed to provide both general cleaning and disinfecting.

This product deodorizes those areas which generally are hard to keep fresh smelling, such as garbage storage areas, empty garbage bins and cans, toilet bowls, and other areas which are prone to odors caused by microorganisms. This product is not for use on critical or semi-critical medical device surfaces. This product is formulated to a neutral pH and will not dull high-gloss floor finishes with repeated use. This product is a water-soluble packet. Follow label dilution instructions by dropping packet directly into water. Do not remove packets before use. Store in cool dry place. Do not handle packets with wet hands.

Bactericidal Activity

This product demonstrates effective disinfectant activity against the organisms: Pseudomonas aeruginosa, Salmonella choleraesuis, Staphylococcus aureus, Methicillin resistant Staphylococcus aureus (MRSA), Vancomycin intermediate resistant Staphylococcus aureus (VISA) and Vancomycin resistant Enterococcus faecalis (VRE).

Virucidal Activity

This product when used on environmental, inanimate hard non-porous surfaces add one small packet (0.1023 ounce) per quart of water exhibits effective virucidal activity against HIV-1, Hepatitis B virus (HBV), Hepatitis C virus (HCV), SARS associated Coronavirus, Herpes Simplex Type 1 (causative agent of fever blisters), Herpes Simplex Type 2 (genital), Influenza A2/Hong Kong.

Fungicidal Activity

When diluted at 0.1023 oz per quart of water, this product is fungicidal against the pathogenic fungi, Trichophyton mentagrophytes (ATCC 9533) (Athlete’s Foot Fungus) (a cause of ringworm) (a cause of ringworm of the foot). Apply solution with a cloth, sponge or hand pump trigger sprayer to hard, non-porous surfaces. Allow the surface to remain wet for 10 minutes, then remove excess liquid. Diluted product should be applied daily or more frequently with heavy facility use.

Mildewstat

This product demonstrates effective disinfectant activity against Aspergillus niger (ATCC 6275). To control mold and mildew (Aspergillus niger (ATCC 6275)) on pre-cleaned, hard, non-porous surfaces, apply solution with a cloth, mop, sponge, hand pump trigger sprayer or low pressure coarse sprayer, making sure to wet all surfaces completely. Let air dry. Prepare a fresh solution for each use. Repeat application at weekly intervals or when mildew growth appears.

ChemPacs Disinfectant Kit - Origins of Clean

Effective

KILLS HIV-1, HBV AND HCV ON PRE-CLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS

CONTACT TIME

Allow surface to remain wet for 10 minutes.

EFFICACY TESTS HAVE DEMONSTRATED THAT THIS PRODUCT IS AN EFFECTIVE BACTERICIDE AND VIRUCIDE IN WATER UP TO 400 PPM HARDNESS (AS CaCO3) IN THE PRESENCE OF ORGANIC SOIL (5% BLOOD SERUM).

Impressive

Tested & Trusted

EFFICACY TESTS HAVE DEMONSTRATED THAT THIS PRODUCT IS AN EFFECTIVE BACTERICIDE AND VIRUCIDE IN WATER UP TO 400 PPM HARDNESS (AS CaCO3) IN THE PRESENCE OF ORGANIC SOIL (5% BLOOD SERUM).

See Full Safety Data Specification Sheet